admin, Author at Red River

thermal energy storage system manufacturing Red River Wyoming ASME fabrication

What Is Thermal Energy Storage System Manufacturing?

Thermal energy storage system manufacturing is the fabrication of pressure vessels, tanks, and integrated systems that store thermal energy for later use in power generation, oil and gas, biogas, and industrial cooling applications. What separates TES fabrication from standard tank work is the combination of cyclic thermal loading, insulation system integration, precise nozzle and diffuser design, and ASME-coded construction documentation required to meet a 20-plus-year service life under continuous charge-discharge cycling. Key Takeaways TES manufacturing requires ASME Section VIII compliance

July 22, 2026

Can Industrial Specs Meet Data Center Needs?

Industrial specifications meet data center needs for the core engineering requirements. ASME Section VIII governs chilled water pressure vessels in data center cooling loops the same way it governs oilfield separators and biogas vessels. Where data center projects diverge is in continuous cycling duty, space constraints, and documentation expectations, not in the applicable fabrication standards. Key Takeaways For ASME pressure vessel code compliance, material selection, and insulation system design, existing industrial standards apply directly to data center thermal storage vessels.

July 22, 2026

Thermal Storage Tanks for Industrial Use

A thermal storage tank for industrial use stores thermal energy as temperature-controlled fluid, typically chilled water, hot water, or process fluid, and releases it on demand. This decouples when thermal energy is generated from when it is needed, so a facility can generate during low-cost off-peak periods and draw stored capacity during peak rate windows. For large facilities on demand-based utility tariffs, that shift is one of the more reliable ways to cut annual energy cost without compromising process performance.

July 22, 2026

Thermal Storage Tanks for Data Centers

Thermal storage tanks for data centers are engineered vessels, not commodity storage, and a wrong specification creates cost and resilience problems that compound over the facility’s life. This guide covers what procurement managers and project engineers need to know before the RFQ goes out. Why Thermal Storage Tanks for Data Centers Are Critical Infrastructure A data center without thermal storage is entirely dependent on its chiller plant running at full capacity whenever cooling demand peaks. That creates two problems that

July 1, 2026

when are shake table tests required pressure vessel seismic qualification Red River

When Are Shake Table Tests Required for Industrial Equipment

Shake table tests are required when applicable standards, regulatory authorities, or project specifications demand physical seismic qualification rather than analysis alone. This guide covers which standards drive those requirements and what they mean for equipment design and fabrication. What Shake Table Testing Actually Is A shake table test subjects a piece of equipment to simulated seismic motion to demonstrate it can survive and remain functional through a defined ground motion event. The equipment is mounted on a platform that replicates

July 1, 2026

seismic zones impact vessel supports pressure vessel fabrication Red River Wyoming

How Do Seismic Zones Impact Vessel Supports

Seismic zone classification is not a checkbox on a design form. This guide covers how seismic zones impact vessel supports, which code requirements drive fabrication scope, and what fabricators need before cutting steel. What Seismic Zone Classification Actually Determines Seismic hazard in the United States is mapped and categorized through the International Building Code (IBC) and ASCE 7, which assigns structures to Seismic Design Categories (SDC) A through F based on the site’s mapped spectral acceleration values and the occupancy

July 1, 2026